Hot water/steam GeneLink absorption chiller 1000EXAJ
0
Details
Evaluate this Device

Hot water/Steam Gene-Link is a Gene-Link with waste steam regenerator added. This Gene-Link can utilize the wasted steam which has a higher temperature than hot water so the waste heat is converted efficiently into cooling, raising the energy efficiency as a result. Another feature is that, large amount of the waste heat can be recovered by one single chiller unit so engine generators with a larger power-generating capacity can be introduced. The amount of gas consumed is cut by giving priority to the use of waste hot water and waste steam.
Furthermore, at load below 68%, the chiller can be operated by only wasted heat.
Furthermore, at load below 68%, the chiller can be operated by only wasted heat.
During partial load operations, priority is given to the use of waste hot water so the volume of steam consumed can be significantly reduced.
Hot water/steam GeneLink absorption chiller 1000EXAJ Specifications:
Chilled Water Flow Rate (m3/hr)
378Cooling Capacity (kW)
3516Heating capacity (kw)
2695
- Fuel or steam reduction rate (DURING RATED HEATING OPERATIONS) %40
- Fuel or steam reduction rate (DURING RATED COOLING OPERATIONS)%60
- Chilled water outlet temperature (℃)7
- Chilled water inlet temperature (℃)15
- Cooling water inlet temperature (℃)32
- Cooling water outlet temperature (℃)37
- Min waste hot water temperature (℃)80
- Max waste hot water temperature (℃)90
- Steam pressure (Mpa)0.78
- cop1.5
- seriesEXAJ
- cooling water flow rate (m3/hr)880
Fuel or steam reduction rate (DURING RATED HEATING OPERATIONS) %
40Fuel or steam reduction rate (DURING RATED COOLING OPERATIONS)%
60Chilled water outlet temperature (℃)
7Chilled water inlet temperature (℃)
15
Related devices to Hot water/steam GeneLink absorption chiller
Are you a supplier?
Generate leads, provide quotes and capture new businesses
Get Started