Micro Plate Heat Exchanger C212L-EZD
The C212L-EZD is an evaporator optimized for R410A for use in high-efficiency chillers with capacities of 200-400 kW.
The Z-pattern channel plate technology pushes the performance of heat exchangers to the limits by fully mixing the liquid and gas refriger- ant through a “zigzag” flow, which increases the heat transfer coefficient. At the same time, inheriting from the dimple plate pattern of the previous generation of MPHE, C212L-EZD reduces the water side pressure drop and the amount of material used. In the reversible mode of the chiller as a condenser, C212L-EZD also has outstanding performance.
To meet demands for higher seasonal efficiency, the C212L-EZD is designed to work efficiently and increase comfort in modern commercial buildings without increasing the carbon footprint. Helping chillers perform more efficiently, it reduces both energy costs and environmental impact. The low hold-up volume reduces the system refrigerant charge and offers valuable savings.
Improved heat transfer - equals higher efficiency heat pumps
Reduced water side pressure drop - equals higher efficiency heat pumps
Minimal hold-up volume - equals less refrigerant charge
Smaller footprint - enables more compact heat pumps
High heat transfer and minimal refrigerant charge - equals a reduced CO2 footprint
- IndustriesSolar heating - Oil units - Heat recovery Engine cooling - Evaporation and condensing - Desuperheating - Process cooling - Hydraulic oil cooling - Laser cooling
- Max. Design Temperature (C)200
- Min. Design Temperature (C)-196
- Max. Design Pressure (bar)45
- Min. Design Pressure (bar)25
- Plate MaterialAISI 316L
- Maximum Length (mm)513.5
- Max. Number of Plates250
- Max. Plate Width (mm)296
- Max. Plate Height (mm)706
- Cover MaterialAISI 304L
- Max. Capacity (kW)400
- Min. Capacity (kW)200