Vertical pump WKTA
Vertical, single- or multistage, barrel pull-out, ring-section pump for underfloor installation on a base frame in pump sump, radial and mixed flow impellers, single- and double-entry suction impellers, flanges to DIN or ANSI, also available in re-entry design.
Applications are Pumping condensate in power stations and industrial systems.
Vertical, can--type ring--section pump.Radial and mixed flow impellers, multistage.Single-- and double--entry suction impellers.
The can is arranged in a pit below the installation floor.The pump is connected with the structure by means of abaseplate.
Medium--lubricated radial plain bearings inside the pump.Combined radial/axial thrust bearing assembly with oil--bath lubrication arranged above the shaft seal.
Hydraulic balancing by means of two casing wear ringsand balancing holes in the impeller.
Gland packing or double--acting mechanical sealin tandem arrangement.In the shaft seal area, the shaft is provided with a replacea-ble shaft sleeve
- Maximum discharge pressure (bar)40
- Max Speed (rpm)1800
- Max head (m)340
- Max flow (m3/h)1800
- Max. temperature (C)100