Marine gearboxes Single input / single output -FLENDER | Linquip

Marine gearboxes Single input / single output

Evaluate this Device
Download Marine gearboxes Single input / single output PDF Catalog

Single input/single output marine gearboxes are used in river boats and coastal vessels, but also in ocean-going vessels. Depending on the application they can be built with vertically, horizontally or diagonally offset shafts. These gearboxes cover a power range from 1,000 to 30,000 kW with transmission ratios from 1.5 to about 12.1.

These gearboxes can optionally be supplied with or without built-in multiple disk clutch.

Using a PTO (Power Take Off), on-board electricity can be produced by a generator. Here, a variety of solutions is available to our customers. For example, the generators can be driven via a primary or secondary PTO. Special solutions such as PTI (Power Take In) or PTH (Power Take Home) are also possible, as are switchable or two-stage PTOs. To adjust the propeller speed in PTH operation, FLENDER provides a switchable PTO with two different transmission ratios.

  • Minimum noise generation

  • Very low vibration

  • Highest efficiency

  • Optimum power-to-weight ratio

  • Worldwide service

Single input / single output Specifications:

  • Maximum Gear Ratio

    12.1
  • Minimum Gear Ratio

    1.5
  • Maximum Power (kW)

    30000
  • Minimum Power (kW)

    1000