Completions equipment FracXion Micro Composite Frac Plug (5.00 in)
The FracXion Micro fully composite frac plug is set using wireline, coiled tubing, or threaded pipe. Antipreset measures provide an industry- leading design that increases confidence at higher run-in-hole speeds.
A one-way internal check valve is closed
with a ball while the zone above the plug is fractured. The plug can be run with the ball in place or the ball can be dropped from surface when the plug is in position. The check valve enables free flow of fluids from below the plug after stimulation.
Based on extensive experience with coiled tubing operations, the FracXion Micro plug
is designed for milling out with minimum torque, generating cuttings that are easily circulated out of the well. Special clutch features at the top and bottom of the plug prevent spinning between plugs during millout, reducing millout time.
The plug has hollow metal button slips that are designed to shatter during milling. This feature and the reduced metal content improve millout time and decrease debris size even further.
Accelerates milling and reduces debris size for easier removal.
Minimizes risk of presetting.
Minimizes fluid costs and environmental impact when used with pumpdown ring.
A three-step procedure simplifies assembly in the field.
Proprietary angled antiextrusion backup system provides 360° element support
FracXion Micro Composite Frac Plug (5.00 in) Specifications:
- Casing size (in)5.0
- Min. Casing Weight (lbm/ft)18
- Plug Outside diameter (in)3.80
- Min. inside diameter (in)0.90
- Ball Diameter (in)1.25
- length (in)14.80
- Pressure Rating (psi)10000
- Temperature Rating (C)275
- Max. Casing Weight (lbm/ft)23.3