Completions equipment FracXion Ultra
FracXion Ultra* HPHT fully composite frac plug isolates zones in vertical, deviated, and horizontal wells during multistage stimulation.
It is set using wireline, coiled tubing, or threaded pipe.
A one-way internal check valve is closed with a ball while the zone above the plug is fractured. The plug can be run with the ball in place or the ball can be dropped from surface when the plug is in position. The check valve allows free flow of fluids from below the plug after stimulation.
Based on extensive experience with coiled tubing operations, the FracXion Ultra plug is designed for milling out with minimum torque, generating cuttings that are easily circulated out of the well. Special clutch features at the top and bottom of the plug prevent spinning between plugs during millout, reducing millout time.
The plug has hollow metal button slips that are designed to shatter during milling. This feature and the reduced metal content improve millout time and decrease debris size even further.
Antipreset measures provide an industry-leading design that increases confidence at higher run-in-hole speeds.
Improves milling speed and reduces debris size
Minimizes risk of presetting.
Minimizes fluid costs and environmental impact when used with pumpdown ring.
Interlocking components to prevent slipping or spinning during removal.
Optimized slip material and design to minimize the amount of hardened material and improve milling time.
FracXion Ultra Specifications:
- Casing size (in)4.500
- Min. Casing Weight (lbm/ft)11.6
- Plug Outside diameter (in)3.625
- Min. inside diameter (in)0.86
- Ball Diameter (in)1.375
- length (in)23.9
- Pressure Rating (psi)10000
- Temperature Rating (C)275
- Max. Casing Weight (lbm/ft)15.1