The Flash Feed Gallery is a two phase feed device fed by a tangential inlet tower nozzle or a radial nozzle with a flow detector. A gallery below provides the residence time necessary to disengage the gas and the liquid. Liquid is then fed to a distributor or into pre-distributor (parting box).
This model is recommended in towers > 900mm (36 inches) ID. It is capable of handling any liquid to vapor feed ratio.
The inside of the gallery may be round or polygonal. The gallery is clamped to a ledge/support ring. Our Flash Feed Galleries are typically seal welded after installation but fully gasketed construction is also available.