Search
Companies

Linde HMV-02 PTO-165 hydraulic motor

Download Catalog

In conventional drives the torque of the hydraulic motor can be transmitted to the cardan shaft only by means of a dropbox. For further optimization of the drive train Linde Hydraulics developed the PTO Through-Drive Motor. Based on the standard hydraulic motor of the Series 02 with just one shaft end, the PTO Through-Drive Motor offers two shaft ends to transmit the torque. Hence the machine designer can conceive the hydraulic motor to fit directly and immediately into the drive train thus saving mounting space. The dropbox usually needed in a conventional propulsion drive can be saved. This reduces both noise emission and fabrication cost of the entire vehicle while overall efficiency increases.

As all Linde motors they are able to provide the required torque even at low speeds and make it possible to start smoothly and sensitively.Therefore, additional gear ratios for rpm reduction are not necessary. This reduces the amout of parts going into the component and also increases the overall mechanical efficiency, minimizes windage losses as well as the noize level of the machine.

The HMV-02D double axial piston hydraulic motor is with a shaft flange also PTO-capable.

  • Two shaft-ends

  • Drop-box eliminated

  • Simplified drive line design (components, part numbers)

  • Fits directly into the drive line

  • No interruption of tractive effort, stepless driving

HMV-02 PTO-165 Specifications:

  • Max Speed (rpm)

    3900
  • Weight (kg)

    76
  • Nominal Torque (Nm)

    1133
  • Power (kW)

    415
  • Nominal Pressure (bar)

    450
  • Nominal Displacement (cc/rev)

    165.6

Linde Hydraulics GmbH & Co. KG

The factory price is not specified
LEEP: Not Available
Suggest a Price