LandSea SUPERNOVA 316 Slickline 0.108
LandSea SUPERNOVA 316 Slickline 0.108
With its combination of high break loads and good pitting and crevice corrosion resistance, Supernova 316® is a cost-effective solution for less corrosive oil and gas wells with zero H2S. Manufactured in Switzerland and certified to 9001: 2008 all Supernova Slicklines are fully traceable, 100% Weld Free, 100% Eddy Current Tested and Wrap Tested. All are produced with a consistent, tightly controlled surface finish, wire helix and wire cast for optimal spooling and in-service performance.
Good general corrosion resistance in wells with medium concentrations of CO2 (up to 30%) and low chlorides (up to 2.5%) with both moderate Bottom Hole Temperatures and Pressures and no H2S
Excellent resistance to general corrosion
High break loads due to high tensile strength
May be used in temperatures up to 150°C in less corrosive environments
Subject to pitting and crevice corrosion in warm chloride environments and to stress corrosion cracking above 60°C
SUPERNOVA 316 Slickline 0.108 Specifications:
Diameter (in)
0.108Nominal Break Load (Lbs)
1940Weight (lbs./1,000 ft.)
0.60