LandSea SUPERNOVA 316 Slickline 0.125

Evaluate this Device

With its combination of high break loads and good pitting and crevice corrosion resistance, Supernova 316® is a cost-effective solution for less corrosive oil and gas wells with zero H2S. Manufactured in Switzerland and certified to 9001: 2008 all Supernova Slicklines are fully traceable, 100% Weld Free, 100% Eddy Current Tested and Wrap Tested. All are produced with a consistent, tightly controlled surface finish, wire helix and wire cast for optimal spooling and in-service performance.

  • Good general corrosion resistance in wells with medium concentrations of CO2 (up to 30%) and low chlorides (up to 2.5%) with both moderate Bottom Hole Temperatures and Pressures and no H2S

  • Excellent resistance to general corrosion

  • High break loads due to high tensile strength

  • May be used in temperatures up to 150°C in less corrosive environments

  • Subject to pitting and crevice corrosion in warm chloride environments and to stress corrosion cracking above 60°C

SUPERNOVA 316 Slickline 0.125 Specifications:

  • Diameter (in)

    0.125
  • Nominal Break Load (Lbs)

    2530
  • Weight (lbs./1,000 ft.)

    0.45