BOSCH Rexroth Fixed displacement vane pumps PVH size: 25 -Bosch Rexroth | Linquip

BOSCH Rexroth Fixed displacement vane pumps PVH size: 25

Evaluate this Device
Download Catalog

Hydraulic pumps of type PVH are vane pumps with constant displacement. The rotor running in a stator ring is located on the tooth profile of the drive shaft. The slots of the rotor accommodate the vanes which are pressed against the internal surfaces of the stator ring by the centrifugal force upon rotation of the rotor. The displacer chambers are laterally sealed by the control plates. Due to the double-eccentric design of the stator ring, there are in each case two pressure chambers opposite of two suction chambers, which provides for hydraulic unloading of the shaft. So it only has to transmit the torque. The vanes are partially unloaded upon passage through the suction range. This unloading has a wear-reducing effect and ensures high efficiency.

  • High bearing life due to hydraulically-balanced drive shaft

  • Low wear due to hydraulically-balanced vanes, Low operating noise

  • Easy to service thanks to exchangeable pump cartridges

  • Position of the suction port selectable

  • Clockwise and counter-clockwise drive rotation

Fixed displacement vane pumps PVH size: 25 Specifications:

  • Max Speed (rpm)

    3600
  • Weight (kg)

    23
  • Series

    PVH
  • Nominal Pressure (bar)

    320
  • Nominal Delivery (LPM)

    36.8
  • Nominal Displacement (cc/rev)

    24.9