ZQ-PET72B Injection Molding Machine -ZQ Blow Molding Machine | Linquip
0
Details
Evaluate this Device
ZQ-PET72B
Download ZQ-PET72B Injection Molding Machine PDF Catalog
ZQ 32,48,72,96 cavities PET preform injection molding systems uses a new part cooling and handling system, which features:
1. Cooling on the inner surface of the preform without using compressed air, unlike most post-mold cooling systems which only cool the outer surface
2. Optimized cycle utilization — being mounted on the moving platen, the cooling system remains active for up to 85% of the overall cycle.

PET preform injection molding systems are available from 280 to 500 tonnes (2800 to 5000 kN) and up to 96 cavities.
  • Two state plasticizing enables plenty injection quantity;

  • Take out plate with three working position insures sufficient cooling time and shorter cycle time;

  • High quality parts and accessories from world famous brands enable higher speed and precision

  • Special screw design increases torque while brings down shear force to avoid degradation

  • Accumulator from world reputable manufacture increases performance while brings down power consumption

ZQ-PET72B Injection Molding Machine Specifications:

  • Power (kW)

    325
  • Dimensions [L × W × H] (mm)

    9765*4547*2350
  • Screw Diameter (mm)

    140
  • Length to Screw ratio
    25
  • Injection mould clamping force (Ton)
    500
  • Injection pressure (Mpa)
    86
  • injection volume (cm3)
    5400
  • Heating power (kW)
    87
  • Injection Capacity (g)
    6500
  • Length to Screw ratio

    25
  • Injection mould clamping force (Ton)

    500
  • Injection pressure (Mpa)

    86
  • injection volume (cm3)

    5400