ZQ-PET96 Injection Molding Machine
0
Details
Evaluate this Device
ZQ 32,48,72,96 cavities PET preform injection molding systems uses a new part cooling and handling system, which features:
1. Cooling on the inner surface of the preform without using compressed air, unlike most post-mold cooling systems which only cool the outer surface
2. Optimized cycle utilization — being mounted on the moving platen, the cooling system remains active for up to 85% of the overall cycle.
PET preform injection molding systems are available from 280 to 500 tonnes (2800 to 5000 kN) and up to 96 cavities.
1. Cooling on the inner surface of the preform without using compressed air, unlike most post-mold cooling systems which only cool the outer surface
2. Optimized cycle utilization — being mounted on the moving platen, the cooling system remains active for up to 85% of the overall cycle.
PET preform injection molding systems are available from 280 to 500 tonnes (2800 to 5000 kN) and up to 96 cavities.
Two state plasticizing enables plenty injection quantity;
Take out plate with three working position insures sufficient cooling time and shorter cycle time;
High quality parts and accessories from world famous brands enable higher speed and precision
Special screw design increases torque while brings down shear force to avoid degradation
Accumulator from world reputable manufacture increases performance while brings down power consumption
ZQ-PET96 Injection Molding Machine Specifications:
Power (kW)
424Dimensions [L × W × H] (mm)
11060*4847*2450Screw Diameter (mm)
140
- Length to Screw ratio25
- Injection mould clamping force (Ton)600
- Injection pressure (Mpa)89
- injection volume (cm3)5400
- Heating power (kW)125
- Injection Capacity (g)6510
Length to Screw ratio
25Injection mould clamping force (Ton)
600Injection pressure (Mpa)
89injection volume (cm3)
5400
Related devices to Injection Molding Machine
Are you a supplier?
Generate leads, provide quotes and capture new businesses
Get Started
