Jordan Mark 586FT/586A Series Back Pressure Regulators -Jordan Valve | Linquip

Jordan Mark 586FT/586A Series Back Pressure Regulators

Evaluate this Device
Download Jordan Mark 586FT/586A Series Back Pressure Regulators PDF Catalog
Mark 586FT installation – designed to be installed in a "T" fashion such that the fluid normally flows in one side and out the other side, with the flow being relieved through the bottom bypass when the pressure exceeds the setting. Mark 586A installation – designed to be installed with one side port as an inlet and the other side port plugged with the flow being relieved through the bottom bypass when the pressure exceeds the setting.
  • Easy to maintain and service – remove bottom entry cage to access plug; diaphragm accessible from top

  • Large effective diaphragm area – for increased accuracy and sensitivity

  • Large orifices and body passages – provides high flow capacities

  • “Tight Shutoff” – choice of hard (ANSI CL IV) or soft (ANSI CL VI) bubble tight seats

  • Versatile application – use on steam, air, gas liquids or chemicals

Jordan Mark 586FT/586A Series Back Pressure Regulators Specifications:

  • Maximum Temperature (C)

    260
  • Minimum Temperature (C)

    -29
  • DN from

    8
  • DN to

    50
  • Pressure Nominal from (bar)

    10
  • Pressure Nominal to (bar)

    40
  • Class from

    150
  • Class to

    300
  • NPS from

    0.25
  • NPS to

    2
  • Pressure Class
    ANSI
  • Shutoff Class
    ANSI Class IV, ANSI Class VI
  • Connection Type
    Threaded, ANSI Flanges, DIN Flanges
  • Body Material
    Ductile Iron, Bronze, Carbon Steel, Stainless Steel
  • Other parts' material
    Hard Seat Plug: 17-4 plug with EPDM (option H) ; 17-4 plug with Viton (option F) l Soft Seat Plug: Buna-N/316 (option B) Viton/316 (option V); EPDM/316 (option J) l Stem: 17-4 Stainless Steel
See full specifications
0