Steri Zero Static Tee Block Valve Sanitary Diaphragm Valves -Steriflow Valve | Linquip

Steri Zero Static Tee Block Valve Sanitary Diaphragm Valves

Evaluate this Device
Download Steri Zero Static Tee Block Valve Sanitary Diaphragm Valves PDF Catalog
Manual or Pneumatically Actuated Inline Barstock Zero Static Use Point Valve
  • Single Weir zero static use point for manual on/off air actuated flow control for transfer or diversion of drug process additives, WFI and other critical system fluids.

  • Bioreactor/fermenter: for sampling or transfer of critical process fluids, inputs or WFI upstream of, and prior to opening the main valve.

  • For sampling or transfer or critical fluids, buffers or WFI upstream of and prior to, opening the main valve in the following areas: separation, filtration, chromatography, formulation, fill finish

  • For sampling or transfer of critical process fluids, buffers or WFI upstream of, and prior to opening main valve

  • Standard: 40 Ra µin (1,0 Ra µm) and better as option

Steri Zero Static Tee Block Valve Sanitary Diaphragm Valves Specifications:

  • Max. working pressure (bar)

    13.8
  • Maximum Temperature (C)

    150
  • Minimum Temperature (C)

    -26
  • DN from

    15
  • DN to

    100
  • NPS from

    0.5
  • NPS to

    4
  • Connection Type

    tri-clamp, extended tube end standard. Other drop connection types available upon request. Additional ports or tandem access configurations available as special options
  • Body Material

    Standard: Barstock, ASME SA479 316L (UNS 31603) or EN 10272:2000 GR 1.4435, Optional: AL-6XN®, Hastelloy® C-22 and others readily available
  • Other parts' material

    Trim Material: traceable ASME and DIN grade of 316L and Super-Austenitic Stainless Steel and Super Alloys readily available l Diaphragm: TFM/EPDM Backer, EPDM - Peroxide Cured
  • Actuator Type
    Manual or Pneumatically Actuated
  • Certifications
    CRN No.: 0C22893.5
See full specifications
0