Mueller 14-48 INCH A-2361 RWGV MJXMJ Resilient Wedge Gate Valve -Mueller Canada | Linquip

Mueller 14-48 INCH A-2361 RWGV MJXMJ Resilient Wedge Gate Valve

Evaluate this Device
Download Mueller 14-48 INCH A-2361 RWGV MJXMJ Resilient Wedge Gate Valve PDF Catalog
Mueller® resilient wedge gate valves have features to make them easier to operate, preserve sealing capability, and interior coating integrity for many years of reliable service. In addition to popular end connection options, these valves can be ordered with Mueller’s exclusive AquaGrip® system that incorporates an O-ring sealed compression connection and integral pipe restraint in one “ready to use” easy and quick to install package.
  • Meets or exceeds all applicable requirements of ANSI/AWWA C515 Standard, UL 262 Listed (thru 24”), FM 1120/1130 Approved (thru 16”), and certified to ANSI/NSF 61 & 372

  • Ductile Iron body and bonnet with nominal 10 mils Pro-Gard® Fusion Bonded Epoxy Coated interior and exterior surfaces; 42" and 48" valves coated with HP Epoxy coating

  • Ductile Iron body and bonnet with nominal 10 mils Pro-Gard® Fusion Bonded Epoxy Coated interior and exterior surfaces; 42" and 48" valves coated with HP Epoxy coating

  • Epoxy coating meets or exceeds all applicable requirements of ANSI/AWWA C550 Standard

  • Ductile Iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron.

Mueller 14-48 INCH A-2361 RWGV MJXMJ Resilient Wedge Gate Valve Specifications:

  • Max. working pressure (bar)

    17
  • DN from

    350
  • DN to

    1200
  • Sealing material

    Triple O-ring seal stuffing box (2 above the thrust collar and 1 below)
  • NPS from

    14
  • NPS to

    48
  • Connection Type

    Mechanical joint end complies with ANSI/AWWA C111 Standard.
  • Design standard

    Meets or exceeds all applicable requirements of ANSI/AWWA C515 Standard, UL 262 Listed (thru 24”), FM 1120/1130 Approved (thru 16”), and certified to ANSI/NSF 61 & 372
  • Body Style

    Ductile Iron body and bonnet with nominal 10 mils Pro-Gard® Fusion Bonded Epoxy Coated interior and exterior surfaces; 42" and 48" valves coated with HP Epoxy coating.
  • Body Material

    Ductile iron
  • Other parts' material
    Ductile Iron wedge, symmetrical & fully encapsulated with molded rubber; no exposed iron
  • Media (working fluid)
    Potable water
See full specifications
0