Hawle 4096E2 SDR 17.6 gate valve -Hawle | Linquip Hawle 4096E2 SDR 17.6 gate valve -Hawle | Linquip

Hawle 4096E2 SDR 17.6 gate valve

Evaluate this Device
Download Hawle 4096E2 SDR 17.6 gate valve PDF Catalog
The welded sockets are guaranteed gas-tight and are also guaranteed with 2 seals acting independent of each other plus a Support liner in PE welded sockets. The welding of the valve in the PE pipeline can be implemented by butt fusion welding or an electrofusion welding joint. Following the welding of the valve is not permissible. Standard model: without handwheel and extension spindle.
  • This resilient seated valve has one flange and one PE tailscrewed and sealed into the sockets.

  • One extension spindle for multiple dimensions

  • Sealing system: the wedge rubber profiles close with minimal friction in the body. There is no abrasion and thus no wear of the sealing body

  • Oversized spindle nut with threads, withstands enormous operating torque

  • 100% suitable for underground Installation

Hawle 4096E2 SDR 17.6 gate valve Specifications:

  • Maximum Temperature (C)

    50
  • Minimum Temperature (C)

    -10
  • DN from

    80
  • DN to

    200
  • Pressure Nominal from (bar)

    6
  • Pressure Nominal to (bar)

    6
  • Sealing material

    elastomer
  • NPS from

    3
  • NPS to

    8
  • Certifications

    OVGW Gepruft
  • Connection Type
    flange - PE end
  • Design standard
    EN 1555-2, DIN 8074
  • Body Material
    ductile iron, inside and outside epoxy powder coated
  • Other parts' material
    Bonnet:ductile iron, inside and outside epoxy powder coate,Stainless steel spindle with rolled thread and flat-rolled sealed sliding surface,Wedge:ductile iron
  • Media (working fluid)
    gas
See full specifications
0