ORBINOX XC (SER.14) MODEL BULK HANDLING HOPPER SHAPE KNIFE GATE VALVE -Orbinox | Linquip

ORBINOX XC (SER.14) MODEL BULK HANDLING HOPPER SHAPE KNIFE GATE VALVE

Evaluate this Device
Download ORBINOX XC (SER.14) MODEL BULK HANDLING HOPPER SHAPE KNIFE GATE VALVE PDF Catalog

The XC model knife gate is a wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the body allows for easy passage of the fluid and makes it ideal for use as silo outlet valve. Widely used in industries such as:

  • Power plants
  • Food and Beverage
  • Chemical plants
  • Mining
  • Etc.

Valve is usually installed under silos or hoppers in vertical pipes with the seat in the upstream side of the valve in order to protect it from the solids flow. This set up helps to protect the seat from premature wear and gate jamming due to solid build-up.

 

 

  • Wafer cast monoblock body with internal cast-in gate wedges and guides for tighter shut-off as well as special cast gate supports for permanent contact between seat and gate when the valve is installed in flow apposite direction

  • Stainless steel rectangular shaped gate, polished both sides to avoid jamming and seat damage

  • Standard EPDM resilient seat. Metal-to-metal seat, as well as high performance rings and deflection cones available

  • Long life PTFE impregnated synthetic fibre plus EPDM o-ring packing with easy access and adjustable gland follower. Wide range of packing materials available

  • RAL-5015 blue epoxy-coating on all cast iron/carbon steel components

ORBINOX XC (SER.14) MODEL BULK HANDLING HOPPER SHAPE KNIFE GATE VALVE Specifications:

  • Max. working pressure (bar)

    10
  • DN from

    50
  • DN to

    600
  • Pressure Nominal to (bar)

    10
  • Class to

    150
  • NPS from

    2
  • NPS to

    24
  • Actuator Type

    Manual (handwheel, chainwheel, lever and bevel gear), pneumatic (single and double-acting), electric and hydraulic actuation
  • Pressure Class

    ANSI
  • Connection Type

    FLANGED
  • Design standard
    EU Safety
  • Flange Standard (Drilling)
    EN1092, ANSI B16.5
  • Body Style
    Wafer cast monoblock body
  • Body Material
    GJL250(GG25) / CF8M
  • Other parts' material
    Seat: Metal-to-Metal, EPDM I Packing: PTFE impreg. synth. fibre with EPDM o-ring I Gland Follower: Al.(DN50-300) - Ductile Iron (DN350-600) / CF8M
  • Blade Material
    AISI 304 / AISI 316
See full specifications
0