LobePro Positive Displacement Rotary Lobe Pumps S Series S8c -LobePro Rotary Pumps | Linquip

LobePro Positive Displacement Rotary Lobe Pumps S Series S8c

Evaluate this Device
Download LobePro Positive Displacement Rotary Lobe Pumps S Series S8c PDF Catalog

S Series pumps utilize unique hardened steel wear plates and specially treated housing segments to provide excellent lifecycle performance in abrasive material applications. Our rotary lobe pumps are typically used to pump sludge to and from thickeners, separators (such as belt presses, centrifuges, and rotary presses), digesters, and clarifiers. They are in fact suitable for pumping any wastewater sludge which has had the hard solids over 1/8” and most grit removed for flows up to 2000 GPM and pressures up to 150 PSI. 

S-frame: 

Maximum Solid Sizes: Compressible:0.75 in (19 mm)/Incompressible:0.13 in (3 mm)

  • Lobe Profile: Helix
  • Number of lobe wings: 6
  • Pulse free or low shear pumping

  • Self-priming or a strong vacuum

  • Measured flow or constant pressure at different flow rates

  • Ability to pump entrained air or gases

  • Wastewater sludge, Bio-Fuels, Slurries, Drilling mud

LobePro Positive Displacement Rotary Lobe Pumps S Series S8c Specifications:

  • Max. Power (kW)

    5.25
  • Max flow (m3/h)

    16
  • Maximum discharge pressure (bar)

    12.1
  • API

    API 676
  • Max Speed (rpm)

    900
  • Max. discharge size (mm)

    50
  • Min flow (m3/h)

    0
  • Max. temperature (C)

    80
  • Displacement (liter)

    30
  • Other parts' material

    Elastomer NBR Opt. HNBR, FKM, EPDM or Eng. Rec.,O-rings FKM,Bolts Carbon Steel ISO 898-,Flange Ring ASTM A36 Carbon Steel,Pressure Disc Stainless Steel Type 316L