Closed Loop Cooling Tower System -Whaley Products, Incorporated (WPI) | Linquip
0
Details
Evaluate this Device
CLS650-10
Whaley's CLS-Series cooling tower systems offer a simplified installation and maintenance approach for a variety of applications. When CLS-Series is utilized, both the cooling tower/s and heat transfer skid are installed outdoors. The heat transfer skid is installed outdoors because there is not room inside the building for a reservoir and heat transfer skid. If there is room for an indoor reservoir and/or heat transfer skid, then Whaley's CLIO-Series would be the best configuration. With a CLS-Series configuration, the cooling towers are typically installed on ground level, and the pump on the heat transfer skid pulls out of the cooling towers in parallel. In cold weather climates, a basin heater package is necessary to guard against freezing inside the cooling tower. Basin heaters are selected based on the installation locations worst possible climate conditions.

Closed Loop Cooling Tower System Specifications:

  • Width (m)

    0.6
  • Height (m)

    2
  • Length (m)

    0.6
  • Max. Motor Power (hp)
    1
  • Max flow (m3/h)
    6.9
  • Max. Capacity (tons)
    10
  • Series
    CLS
  • Max. Motor Power (hp)

    1
  • Max flow (m3/h)

    6.9
  • Max. Capacity (tons)

    10
  • Series

    CLS

Related devices to Closed Loop Cooling Tower System